S 1450L
Car Wheel Balancer
PRODUCT DESCRIPTION
S1450 is designed for professionals that want premium performance from a balancer.
easyWEIGHT ™: pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
easyALU ™: touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Semi-automatic pre-selection of balancing mode via easyALU
VPM technique: measurement system for high precision and repeatability.
QuickBAL ™: 30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Multiple users: two operators can operate with the balancer simultaneously and quickly recall their rim dimensions.Stop in position: touch the screen to automatically rotate the wheel to weight application position.
FEATURES
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Multiple users
Two operators can operate with the balancer simultaneously and quickly recall their rim dimensions.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
Stop in position
Touch the screen to automatically rotate the wheel to weight application position.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Quick nut |
| Diametre of shaft | 40 mm |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.86 inch |
| Start/Stop balance time - Check spin | 4.5 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1330 x 870 x 1880 |
| Dimensions LxWxH | |
| Net weight | 115 kg |
Versions
S1450 is designed for professionals that want premium performance from a balancer.
S1450 is designed for professionals that want premium performance from a balancer.
ACCESSORIES
dia. 200 mm
d.113-170mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
d. 195-214 mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
for Y2k balancers with 40 mm shaft, consisting of cone 113 -170 mm #24936 + spacer #24937
Spacer and cone 122-172 mm, for all Y2k balancers with 40 mm shaft
to be clamped with centring cones 25790 or 24936, or with a studhole flange plate
Compared to standard cones, low-taper collets have more contact area and engage the wheel at a better angle; they are also neccessary for Clad wheels because they are shorter and only contact the metal part of the wheel, but can also be used for "standard" wheels as a replacement for+E106 cones.
For light trucks MB Sprinter and VW Crafter,
series 400/ 46
pitch circle diameter 6 x 205 mm
