S 1280
Digital balancer - accuracy and small footprint
PRODUCT DESCRIPTION
The wheel balancer for service stations and garages with small tyre service volume - combines high accuracy with small footprint
Intuitive LED display
Semi-automatic input of rim diameter and offset with gauge arm
Manual input of rim width
Imbalance optimisation program
Imbalance minimisation program
Constant rotational speed
QuickBAL ™: 30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy
Split weight mode
The pedal-operated mechanical lock firmly holds the wheel in every position
FEATURES
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Quick nut |
| Diametre of shaft | 40 mm |
| Measuring speed | < 100 rpm |
| Balancing accuracy | 1 g (0.035 oz) |
| Balancing accuracy | 1 g (0.035 oz) |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.85827 inch |
| Start/Stop balance time - Check spin | 6 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 960 mm |
| Max wheel diameter | 37.8 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1100 x 1005 x 1711 |
| Dimensions LxWxH | |
| Net weight | 70 kg |
ACCESSORIES
dia. 200 mm
d.113-170mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
d. 195-214 mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
for Y2k balancers with 40 mm shaft, consisting of cone 113 -170 mm #24936 + spacer #24937
Spacer and cone 122-172 mm, for all Y2k balancers with 40 mm shaft
to be clamped with centring cones 25790 or 24936, or with a studhole flange plate
Compared to standard cones, low-taper collets have more contact area and engage the wheel at a better angle; they are also neccessary for Clad wheels because they are shorter and only contact the metal part of the wheel, but can also be used for "standard" wheels as a replacement for+E106 cones.
for all Y2k balancers with integrated flange
