S 1480L
DIgital balancer - productivity and ease of use
PRODUCT DESCRIPTION
The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume: with the easyWeight pinpoint indicator light – an accurate, fast and easy solution to position adhesive weights on the wheel
Intuitive display in ergonomic raised position
easyWEIGHT ™: pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Semi-automatic input of rim diameter and offset with gauge arm
Smart Sonar ™: automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
easyALU ™: touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
VPM measurement technique
Constant rotational speed
Wheel clamped on the integrated flange by means of a quick nut
Oversize shaft
FEATURES
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Ergonomic display
The raised display increases ergonomic handling.
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Quick nut |
| Diametre of shaft | 40 mm |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.86 inch |
| Start/Stop balance time - Check spin | 4.5 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1313 x 868 x 1834 |
| Dimensions LxWxH | |
| Net weight | 115 kg |
Versions
The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume: with the easyWeight pinpoint indicator light – an accurate, fast and easy solution to position adhesive weights on the wheel
ACCESSORIES
dia. 200 mm
d.113-170mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
d. 195-214 mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
for Y2k balancers with 40 mm shaft, consisting of cone 113 -170 mm #24936 + spacer #24937
Spacer and cone 122-172 mm, for all Y2k balancers with 40 mm shaft
to be clamped with centring cones 25790 or 24936, or with a studhole flange plate
Compared to standard cones, low-taper collets have more contact area and engage the wheel at a better angle; they are also neccessary for Clad wheels because they are shorter and only contact the metal part of the wheel, but can also be used for "standard" wheels as a replacement for+E106 cones.
For light trucks MB Sprinter and VW Crafter,
series 400/ 46
pitch circle diameter 6 x 205 mm
