S 1480P
DIgital balancer - productivity and ease of use
PRODUCT DESCRIPTION
The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume: with the easyWeight pinpoint indicator light – an accurate, fast and easy solution to position adhesive weights on the wheel
Intuitive display in ergonomic raised position
easyWEIGHT ™: pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Semi-automatic input of rim diameter and offset with gauge arm
Smart Sonar ™: automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
easyALU ™: touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
VPM measurement technique
Constant rotational speed
QuickBAL ™: 30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Split weight mode
Electromechanical lock
Wheel clamped on the integrated flange by means of a quick nut
Oversize shaft
Power Clamp ™: patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
FEATURES
easyWEIGHT™
Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.
Ergonomic display
The raised display increases ergonomic handling.
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Power Clamp™
Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Power Clamp |
| Diametre of shaft | 40 mm |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.86 inch |
| Start/Stop balance time - Check spin | 4.5 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1313 x 868 x 1834 |
| Dimensions LxWxH | |
| Net weight | 115 kg |
Versions
The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume: with the easyWeight pinpoint indicator light – an accurate, fast and easy solution to position adhesive weights on the wheel
ACCESSORIES
dia. 200 mm
d.113-170mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
d. 195-214 mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
for Y2k balancers with 40 mm shaft, consisting of cone 113 -170 mm #24936 + spacer #24937
Spacer and cone 122-172 mm, for all Y2k balancers with 40 mm shaft
to be clamped with centring cones 25790 or 24936, or with a studhole flange plate
Compared to standard cones, low-taper collets have more contact area and engage the wheel at a better angle; they are also neccessary for Clad wheels because they are shorter and only contact the metal part of the wheel, but can also be used for "standard" wheels as a replacement for+E106 cones.
For light trucks MB Sprinter and VW Crafter,
series 400/ 46
pitch circle diameter 6 x 205 mm
