S 1750S
Video balancer - accuracy and small footprint
PRODUCT DESCRIPTION
The wheel balancer for garages with small tyre service volume - combines high accuracy with small footprint
19“ TFT monitor with intuitive SILVER user interface
Semi-automatic input of rim diameter and offset with gauge arm
Smart Sonar ™ automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation
Imbalance optimisation program
Imbalance minimisation program
Constant rotational speed
easyALU ™: touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode
QuickBAL ™: 30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy
Split weight mode
The pedal-operated mechanical lock firmly holds the wheel in every position
FEATURES
Gauge arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split weight mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
Touch panel
Easy to operate with a comfortable touch panel.
easyALU™
Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
Smart Sonar™
Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
VPM technique
Measurement system for high precision and repeatability.
MEDIA
TECH SPECS
| Motorized | Yes |
| Wheel clamping | Quick nut |
| Diametre of shaft | 40 mm |
| Measuring speed | < 200 rpm |
| Balancing accuracy | 0.035 oz |
| Balancing accuracy | 1 g (0.035 oz) |
| Angular resolution | ± 0,35° |
| Lenght of shaft | 225 mm |
| Lenght of shaft | 8.85827 inch |
| Start/Stop balance time - Check spin | 4.5 s |
| Rim diameter range | 8" - 32" |
| Offset range | 1" - 20" |
| Rim width range | 1" - 20" |
| Max. wheel diameter | 1050 mm |
| Max wheel diameter | 42 inch |
| Max. wheel weight | 70 kg |
| Max. wheel weight | 154 lbs |
| Input power (VAC) | 230 VAC 1ph 50/60 Hz |
| Dimensions LxWxH | 1012 x 781 x 1834 |
| Dimensions LxWxH | |
| Net weight | 100 kg |
Versions
The wheel balancer for garages with small tyre service volume - combines high accuracy with small footprint
ACCESSORIES
dia. 200 mm
d.113-170mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
d. 195-214 mm, for balancers with 40 mm shaft,
to be used in conjunction with spacer ring #24937 only.
for Y2k balancers with 40 mm shaft, consisting of cone 113 -170 mm #24936 + spacer #24937
Spacer and cone 122-172 mm, for all Y2k balancers with 40 mm shaft
to be clamped with centring cones 25790 or 24936, or with a studhole flange plate
Compared to standard cones, low-taper collets have more contact area and engage the wheel at a better angle; they are also neccessary for Clad wheels because they are shorter and only contact the metal part of the wheel, but can also be used for "standard" wheels as a replacement for+E106 cones.
For light trucks MB Sprinter and VW Crafter,
series 400/ 46
pitch circle diameter 6 x 205 mm
